Accessory cover 15 mm, 2 m. Suits our large range of aluminium profiles with 15 mm groove.…
Cover High Opal creates an even and “radiant light”. It absorbs light but creates at the s…
Accessory cover 15 mm, 2 m. Suits our large range of aluminium profiles with 15 mm groove.…
Accessory End Cap Dual in aluminium. Suits our aluminium profile Dual, 2pcs.
End pieces in opal plastic for Cover High Opal 15 mm, 2pcs.
Accessory aluminium fastener. Suits most of our large range of aluminium profiles. See rel…
Accessory M3 Suspension Kit contains 2x 1500 mm wires with threaded M3 ends, 2x check nuts…
Accessory M3 Suspension Kit contains 2x 1500 mm wires with threaded M3 ends, 2x check nuts…
Accessory End Cap Dual in aluminium. Suits our aluminium profile Dual, 2pcs.
Accessory aluminium fastener. Suits most of our large range of aluminium profiles. See rel…
Low-build profile with several different uses. Together with flat covers, it makes a neat little luminaire that easily integrates into confined spaces. With the Opal High cover, you can create an even “omnidirectional light” similar to the T5 luminaire. Magnetic foot for installation on metallic surfaces. Refer to the tabular summary under the document tab for suitable LEDstrips.
Wedge-shaped profile for indirect lighting of walls and ceilings with place for internal cable routing. Can be installed for up or downlight and supplemented with various covers to give the desired light pattern. Can also be installed for side light adjacent to or in corners. A number of fastenings are available for installation on walls and can be selected depending on the application. Refer to the tabular summary under the document tab for suitable LEDstrips.
Profile for installation between ceiling and wall to create decorative raking light along wall surfaces. Covers can be chosen based on appearance and light pattern. With the Opal Cover, an even light is created which is perfect for creating uniform lines of light. Refer to the tabular summary under the document tab for suitable LEDstrips.
Profiles with downward light to illuminate steps and other changes in level in a decorative and safe manner. The profile has place for concealed cable routing. Complete with cover to protect and change appearance and light pattern. Refer to the tabular summary under the document tab for suitable LEDstrips.
Low-build profile with a large range of accessories for different areas of use. Together with the semicircular casings, this profile is hardly visible and makes it suitable for installing in furniture or as an individual luminaire. Magnetic foot for installation on metallic surfaces. Refer to the tabular summary under the document tab for suitable LEDstrips.
Universal profile mainly for surface mounting. Complete with cover to protect and change appearance and light pattern. With the Opal Cover, an even light is created without any spots, perfect for creating uniform lines of light. Any unevenness on the installation surface when installing with clips is adjusted with the three grooves in the profile. Refer to the tabular summary under the document tab for suitable LEDstrips.
Low-build profile with a wide range of uses, only to protect the LEDstrip and increase cooling or as a complete luminaire. Thanks to its neat little design, it is easy to use even in confined spaces. Such as bench lighting, for raking and work lighting in reception desks and in display cabinets. Any unevenness on the installation surface when installing with clips is adjusted with the three grooves in the profile. Refer to the tabular summary under the document tab for suitable LEDstrips.
Section for recessed installation in ceilings, wall or floors. An elegant and uniform cover frame can be made with end caps. The Opal cover, which can withstand a 500 kg load, means the profile can also be installed in pathways. With the Opal Cover, an even light is created which is perfect for creating uniform lines of light. Refer to the tabular summary under the document tab for suitable LEDstrips.