Milo I GU10

Wall-mounted luminaire with timeless design with downward light emission. GU10 socket allowing the selection of colour temperature and luminous intensity. Separate rear element with dual cable bushings and push-in, loop-in, loop-out terminal block for easy installation. IP55 design with anodised and powder-coated housing for rough outdoor climate. Delivered with spacers for surface-mounted cable routing.

GTIN	Item Name	Color
7392971133010	Milo I GU10 Grey	Grey
7392971133003	Milo I GU10 White	White
7392971133027	Milo I GU10 Anthracite	Antracit

Description: GTIN 7392971133010

Item Name Milo I GU10 Grey

Warranty 5 years

Type .
Light Technical Data: Light Source Included No

Lamp Holder (type) GU10

Light sharing Symmetric

Light Outlet Direct
Technical data: Adjustable No

Voltage (type) AC

Voltage Interval (V) 220...240

Voltage Nominal (V) 230

Line Frequency (Hz) 50, 60
Operation and Connection: Dimmable Yes

Driver Included No

Connection (type) Quick Terminal

Connection (mm2) 3x0,5-2,5

Through Wiring Yes

Strain Relief Yes

Power Interval for Catalogue (W) 50

Operating Temperature -20…+40
Color and material: Material Aluminium

Color Grey
Measurement and installation: Operating Environment Indoor / wet locations, Outdoor

IP Degree of Protection 55

Protection Class I

Installation Surface mounted

Mounting Installation Screw Mounting

Approval Marks CE

Impact Strength IK06

Width (mm) 82

Height (mm) 150

Depth (mm) 112

Diameter (mm) 68

Weight (kg) 0,593

Cone GU10

A neat wall fitting with GU10 socket with a clean conical design providing an asymmetrical light spread that lights up the wall and the ground below. Simple installation thanks to separate rear element with dual cable bushings and push-in terminal block for through wiring. Spacers for surface-mounted cable routing included. IP54 rated with durable powder coating for tough environments in white, grey or anthracite. The light source can be selected for customised color temperature and luminous intensity.

Peak E27

Wall luminaire in classic design for large and small facades that creates a wide light distribution and illuminates both wall and ground. With E27 base, you can choose your own light source (not included). IP23 classification with durable powder coating to withstand our Nordic climate. Easily installed thanks to separate rear element and push-in, loop-in, loop-out terminal block for direct connection to 230V. Rear element also with integrated spirit level for easier installation. Comes with spacers for surface-mounted cable routing.

Milo II GU10

Wall-mounted luminaire in a timeless design with light emission both up and down. GU10 socket allowing the selection of colour temperature and luminous intensity. Separate rear element with dual cable bushings and push-in, loop-in, loop-out terminal block for easy installation. IP55 design with anodised and powder-coated housing for rough outdoor climate. Delivered with spacers for surface-mounted cable routing.

Arc

Facade luminaire in traditional design with a pleasant, even and wide light distribution on the wall. The luminaire comes with or without two integrated electric sockets on the underside, perfect for garden tools, electric grills or winter decorations. Possible to control sockets and lighting separately. Very simple installation thanks to separate body, few screws and lots of room. Integrated driver with adjustable light level via DIP-Switch Power. Can be dimmed using external driver, see user instructions.

Milo I GU10

Milo I GU10 Grey

Accessories

Downloads

Related products

Cone GU10

Peak E27

Milo II GU10

Arc