Milo Pillar

Cylindrical bollard, IP65 rating. This fitting provides striking, glare-free and omnidirectional light distribution with a 150° spread for lighting gardens, pathways and wooden decks. Aluminium housing, anodised and powder coated to withstand Nordic weather conditions. Integrated driver with separate loop-in, loop-out terminal block for easy 230V connection. Comes with complete kit for embedding in concrete.

Variants	GTIN	Item Name	Color
	7392971129174	Milo Pillar Grey 3000K	Grey
	7392971128887	Milo Pillar Anthracite 3000K	Antracit

Description: GTIN 7392971129174

Item Name Milo Pillar Grey 3000K

Warranty 5 years
Light Technical Data: Luminaire Lumen (lm) 290

Light Source LED

Light Source Included Yes

Replaceability Non-replaceaable LED, Non-replaceable Control gear

LED Colour Warm White

Colour Temperature (K) 3000

Colour Rendering Index (Ra) >80

Colour Consistency (SDCM) 3

Luminous Intensity (cd) 75

Beam Angle (°) 150

Light sharing Symmetric

Light Outlet Indirect

Number of Lamps (pcs) 1

Number of LED (pcs) 1

Life Time L70 50 000h Ta 25°C

Nominel Life Time (h) 50000

Life Time Driver 50 000h/10%
Technical data: Adjustable No

Voltage (type) AC

Voltage Interval (V) 220...240

Voltage Nominal (V) 230

Line Frequency (Hz) 50, 60

Power LED (W) 7

Power Luminaire (W) 7,7

System Power (W) 7,7

Efficiency Luminaire (lm/W) 38

Efficiency System (lm/W) 38
Operation and Connection: Dimmable No

Type of Dimming OnOff

Driver Included Yes

Driver Model Constant Current

Driver Type Built-in

Connection (type) Quick Terminal

Connection (mm2) 3x0,75-2,5

Through Wiring Yes

Strain Relief Yes

Leakage current (mA) (at 230 V, 50 Hz, full load) 0,12

Operating Temperature -20…+40

Max. Tc (°C) 75
Color and material: Material Aluminium

Color Grey

Environmental Assessment SundaHus
Measurement and installation: Operating Environment Indoor / wet locations, Outdoor

IP Degree of Protection 65

Protection Class I

Installation Surface mounted

Mounting Installation Screw Mounting

Approval Marks CE

Impact Strength IK08

Height (mm) 750

Diameter (mm) 150

Weight (kg) 2,5

Cone Pillar

Stylish, durable bollard with asymmetric light distribution to illuminate grounds and pathways. Integrated driver with adjustable light level via DIP-Switch Power for direct connection to 230V. IP54 and IK09 classing with durable powder coating for tough environments. Comes with complete kit for embedding in concrete. Complete your installation with our IP68 ground joints.

Pave Pillar

Stylish bollard in the Pave family with impressive but simple design for a well lit footpath or entrance. Choose the appearance and increase anti-glare for your luminaire in combination with Top, Deco II and Deco IV. Easily fitted bollard with through wiring, up to 5x16mm2 connection. Replaceable LED and driver. Selectable lumen output and adjustable colour temperature via DIP-switch. 4kV surge voltage protection as standard, separate 10kV surge voltage protection available as an accessory. Contact us if you want to paint your Pave in a different colour.

Milo XL I

Wall-mounted luminaire with timeless design with downward light emission. LED COB with reflector optics and well-conceived design provides a good light spread and good luminous comfort. Separate rear element with dual cable bushings and push-in, loop-in, loop-out terminal block for easy installation. IP55 design with anodised and powder-coated housing for rough outdoor climate. Comes with built-in driver and spacers for surface-mounted cable routing.

Milo XL Down

Ceiling light in timeless design for installation flat against the ceiling. Good glare free reflector technology with high lumen output. IP55 rating, anodised and powder coated for tough environments. Simple installation thanks to separate rear element with dual cable bushings and push-in terminal block for through wiring. Spacers and cover ring for surface mounted cable included, facilitates installation on uneven ceilings and simplifies row installation. Built-in mains dimmable driver.

Milo II

Wall-mounted luminaire in a timeless design with light emission both up and down. LED COB with reflector optics and well-conceived design provides a good light spread and good luminous comfort. Separate rear element with dual cable bushings and push-in, loop-in, loop-out terminal block for easy installation. IP55 design with anodised and powder-coated housing for rough outdoor climate. Comes with built-in driver and spacers for surface-mounted cable routing.

Milo Pillar

Milo Pillar Grey 3000K

Accessories

Pave Pillar Foundation 108mm

Pave Pillar Ground anchor

Connector Straight 5P IP68

Connector 4-way 4P IP68

Downloads

Related products

Cone Pillar

Pave Pillar

Milo XL I

Milo XL Down

Milo II