If you need spare parts, contact our customer support
Low-build LED Plafond in slim design with a pleasant uplight that evens out contrasts towards the ceiling or wall. Consists of recycled ocean plastic. Selectable colour temperature via DIP-Switch ColourTemp 3000K or 4000K. Easily installed IP44 luminaire with long lifetime and high lumen output, comes complete with built-in driver; choose between many different control alternatives, selected models (Moon 380, 380S, 320SC, 380SC, 320 Bluetooth, 380 Bluetooth, 320 DALI, 380 DALI) can also be equipped with emergency lights. Comes with screw holes that fit over a ceiling box, two entrances at the bottom, one of which is centred. Cable bushings for surface-mounted cable routing from two sides.
A Hide-a-lite Choice – a conscious choice for a sustainable future. Easily installed base plafond consisting of 90% recycled material. Easily disassemble the fixture and replace parts after consumption. Perfect plafond for the private indoor environment such as stairwells, storage rooms and wardrobes, for surface mounting. Plenty of space in the fixture and possibility for surface-mounted cable routing. Choose the light source you want with properties as needed (not included). Recycled material, easy installation and minimal maintenance make the plafond an economical, sustainable and environmentally-friendly choice.
LED luminaire for installation flat on the ceiling or wall. High lumen output and good efficiency that meets with tough market demands and requires fewer luminaires per installation. IP44 and class II to suit many indoor milieus. Easily installed long-life luminaire with microwave sensor for presence control with dip switch for setting range, dusk control and time delay. Possibility of surface mounted cable routing.
Effective LED panel available with opal diffuser or microprismatic louvre. Perfectly adapted for installation in ceilings with visible support profile, which makes it ideal for open-plan offices, schools and other areas where glare-free lighting is important. For those who want surface-mounted installation, a spacer frame with pre-perforated holes for surface-mounted cables is available as an accessory. Selectable colour temperature via DIP-Switch ColourTemp. 3000K or 4000K. Sky MP meets screen and UGR requirements (UGR<19) in compliance with EN 12464-1 in standard conditions. Each panel is supplied complete with cords and power plugs and driver; choose between dimmable and DALI-2, with or without through-wiring Q box or Linect. The DIM version 600x600 comes with 2m pre-installed cord set and is available in a 5-pack for quick installation for larger projects.
Highly efficient fluorescent tube replacement with various control options. Body of white enamelled steel sheet metal with folding patented end caps and prismatic cover in durable polycarbonate with an opal diffuser for even light outlet. Both end caps and cover are recycled plastic. Replaceable LED and driver, possible to choose colour temperature and adjust lumen output via DIP-switch. Quick terminal at both ends for simple through wiring. Through wiring 5x2,5mm2 as standard. Liteline G2 is perfect where the light requirement is great and the quality requirement is high, such as production environments, garages or storage areas.
Industrial luminaire IP44 in basic model, replaces T5 and T8 luminaires with lower energy consumption and reduced maintenance. Luminaire of coated steel plate. Line prismatic diffuser in impact resistant PC with opal film and smart folding end caps. Push-in terminal, through wiring, one bushing in each end cap and two in the middle, one of which is centred, for concealed cable routing. Perfect when you are looking for a simple solution that does the job – basement storage, laundry rooms or simple industrial premises. Can be adjusted to lower light output and wattage via DIP-Switch Power.